The TLC555QDR is a monolithic Timing Circuit fabricated using the TI LinCMOS process. The timer is fully compatible with CMOS, TTL and MOS logic and operates at frequencies up to 2MHz. Because of its high input impedance, this device uses smaller timing capacitors than those used by the NE555. As a result, more accurate time delays and oscillations are possible. Power consumption is low across the full range of power supply voltage. Like the NE555, the TLC555 has a trigger level equal to approximately one-third of the supply voltage and a threshold level equal to approximately two-thirds of the supply voltage. These levels can be altered by use of the control voltage terminal (CONT). When the trigger input (TRIG) falls below the trigger level, the flip-flop is set and the output goes high. If TRIG is above the trigger level and the threshold input (THRES) is above the threshold level, the flip-flop is reset and the output is low.

• Very low power consumption
• Capable of operation in astable mode
• CMOS Output capable of swinging rail to rail
• High output-current capability
• Output fully compatible with CMOS, TTL and MOS
• Low supply current reduces spikes during output transitions
• Functionally interchangeable with the NE555, has same pin-out
• ESD protection exceeds 2000 V per MIL-STD-883C, method 3015.2
• Green product and no Sb/Br

Applications

Aerospace, Defence, Military, Automotive

Product details

Frequency: 2.1MHz Supply Voltage Min: 5V Supply Voltage Max: 15V Digital IC Case: SOIC No. of Pins: 8Pins Operating Temperature Min: -40C Operating Temperature Max: 125C Product Range: – MSL: MSL 1 – Unlimited

Other details

Brand TEXAS INSTRUMENTS Part Number TLC555QDR Quantity Each (Supplied on Cut Tape) Technical Data Sheet EN

All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.