The SN74ABT125D is a quadruple bus Buffer Gate features independent line drivers with 3-state outputs. Each output is disabled when the associated output-enable (OE)\ input is high. This device is fully specified for hot-insertion applications using IOFF and power-up 3-state. The IOFF circuitry disables the outputs, preventing damaging current backflow through the devices when it is powered down. The power-up 3-state circuitry places the outputs in the high-impedance state during power up and power down, which prevents driver conflict. To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pull-up resistor, the minimum value of the resistor is determined by the current-sinking capability of the driver.

• High-drive outputs
• IOFF and power-up 3-state support hot insertion
• Latch-up performance exceeds 500mA per JEDEC standard JESD-17
• <1V at VCC = 5V, TA = 25?C VOLP (output ground bounce)
• Green product and no Sb/Br

Applications

Industrial, Automation & Process Control, Signal Processing

Other details

Brand TEXAS INSTRUMENTS Part Number SN74ABT125D Quantity Each

All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.

All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.