The MCP2510-I/SO is a 18-pin stand-alone CAN (Control Area Network) Controller with SPI Interface. It features an industry standard SPI serial interface, enabling an easy connection to virtually any microcontroller. The MCP2510 provides immediate CAN support across the entire breadth of Microchip’s 100+ PICmicro microcontrollers, providing a seamless migration path and maximum design flexibility for CAN designs. The MCP2510 contains on-board features, such as interrupt capability, message masking and filtering, message prioritization, multi-purpose I/O pins and multiple transmit/receive buffers which significantly offload the microcontroller overhead required to handle CAN message traffic.

• Data byte filtering
• Start-of-frame (SOF) output
• Implements full CAN V2.0A and V2.0B at 1Mb/s
• 0 to 8-byte Message length
• Standard and extended data frames
• Programmable bit rate up to 1Mbps
• Support for remote frames
• Two receive buffers with prioritized message storage
• Six full acceptance filters
• Two full acceptance filter masks
• Three transmit buffers with prioritization and abort features
• Loop-back mode for self test operation
• Supports SPI modes 0,0 and 1,1
• Clock out pin with programmable prescaler
• Interrupt output pin with selectable enables
• Buffer full output pins configurable as interrupt pins
• Low power CMOS technology

Applications

Motor Drive & Control, Sensing & Instrumentation, Metering, Automotive, Sensing & Instrumentation, Industrial

Other details

Brand MICROCHIP Part Number MCP2510-I/SO Quantity Each Technical Data Sheet EN Product Change Notice EN CAD CadSoft_EAGLE EN

All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.