The C2220X105K2RACTU is a surface-mount Multilayer Ceramic Chip Capacitor with 100% matte Sn flexible termination, 2220 case and X7R dielectric. A conductive silver epoxy is utilized between the base metal and nickel barrier layers of KEMETs standard termination system in order to establish pliability while maintaining terminal strength, solderability and electrical performance. This technology was developed in order to address the primary failure mode of MLCCs-flex cracks, which are typically the result of excessive tensile and shear stresses produced during board flexure and thermal cycling. Flexible termination technology inhibits the transfer of board stress to the rigid ceramic body, therefore mitigating flex cracks which can result in low IR or short circuit failures.

• Superior flex performance
• High capacitance flex mitigation
• Non-polar device, minimizing installation concerns
• EIA 0603, 0805, 1206, 1210, 1808, 1812, 1825, 2220 and 2225 case sizes
• DC voltage ratings from 6.3V to 250 V
• Available capacitance tolerances of 5%, 10% and 20%
• Non-polar device, minimizing installation concerns
• 100% pure matte tin plated termination finish allowing for excellent solderability

Applications

Power Management, Consumer Electronics, Medical, Industrial, Automotive, Aerospace, Defence, Military, Communications & Networking

Other details

Brand KEMET Part Number C2220X105K2RACTU Quantity Each (Supplied on Cut Tape) Technical Data Sheet EN CAD Multiple Formats EN Manufacturer Catalogue EN

All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.