FT233HP is a hi-speed USB device with Type-C/PD 3.0 controller IC that fully supports the latest USB Type-C and Power Delivery (PD) standards enabling support for power negotiation with the ability to sink or source current to a USB host device. The USB bridge function delivers 1 independent channel compatible with the FT232H single hi-speed USB to multipurpose UART/FIFO solution. 2 USB PD 3.0 port support. Port 1 supports dual role swap function while port 2 supports sink mode with charging function through to port 1. Supports a proprietary half duplex FT1248 interface with a configurable width, bi-directional data bus (1, 2, 4 or 8 bits wide). UART Interface supports 7/8 bit data, 1/2 stop bits, and odd/even/mark/space/no parity. It features asynchronous serial UART interface option with full hardware handshaking and modem interface signals and fully assisted hardware or X-On / X-Off software handshaking.

• Compact 64-pin Lead Free QFN package, supports 2 PD 3.0 port
• Supports PD Specification 3.0
• Supports 5V3A, 9V3A, 12V3A, 15V3A, 20V3A and more PDOs as sink or source
• Type-C/PD physical layer protocol, up to 8 configurable PD GPIO pins support
• CPU-style FIFO interface mode simplifies CPU interface design
• Single channel USB to serial / parallel ports with a variety of configurations
• Low operating and USB suspend current
• Auto-transmit enable control for RS485 serial applications using the TXDEN pin
• USB 2.0 hi-speed (480Mbits/second) and full speed (12Mbits/second) compatible
• UHCI/OHCI/EHCI host controller compatible

Warnings Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.

Other details

Brand FTDI Part Number FT233HPQ-TRAY Quantity Each Technical Data Sheet EN

All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.